Developer and testing tools
Charles Proxy proxy setup
Want to run Charles Proxy through a proxy? Charles is an HTTP debugging proxy that can chain to an external proxy. Below is the exact setup, a working example, how countries and addresses work, and a short list of fixes for the errors people hit most often.
You need an active DataImpulse proxy first. Create an account, add funds from US$1, and order a proxy in one of the 62 countries we stock. The dashboard then shows the host, port, username and password. If you have not done that yet, start with the quick-start guides.
- Tool
- Charles Proxy
- Category
- Developer and testing tools
- Proxy protocol
- HTTP with username and password
- Example host
- 203.0.113.10
- Countries in stock
- 62
What you need from your dashboard
Every DataImpulse proxy has the same four values, and each proxy has its own. The example values below are placeholders, so always copy the real ones from your dashboard. There is nothing to add to the username: the country was chosen when you ordered.
| Setting | Example | What it is |
|---|---|---|
| Host | 203.0.113.10 | The proxy's address, usually an IP, shown with the proxy in the dashboard |
| Port | 8080 | The proxy's port, which differs from proxy to proxy |
| Username | username | The proxy username, used exactly as shown |
| Password | password | The proxy password. Treat it like any other secret |
| Protocol | HTTP | Use an http:// proxy URL, even for HTTPS sites |
Set up Charles Proxy with a DataImpulse proxy
Charles Proxy is a tool, so you set the proxy in its settings and not in code. These are the steps. Menu names change between versions, so if a label is slightly different in your version, look for the nearest proxy or network option.
- Open Proxy, External Proxy Settings.
- Tick Use external proxy servers and Web Proxy (HTTP).
- Enter your proxy's host and its port from the dashboard.
- Tick Proxy server requires a password and enter your username and password.
- Tick Secure Web Proxy (HTTPS) with the same values, click OK and check a request.
Countries and addresses
You choose the exit country when you order, and every proxy in the order is an IP registered in that country. There is nothing to add to the username in Charles Proxy: enter the credentials exactly as the dashboard shows them.
Each proxy keeps the same address for the whole rental period, so a session in Charles Proxy stays on one address by default. To work from another country, or to spread work across several addresses, order more proxies and give each one its own profile, connection or entry in Charles Proxy.
Check that Charles Proxy is really using the proxy
Do not assume. Verify the connection before your real job starts, and again after any change to the settings.
- Request https://httpbin.org/ip or any IP lookup page with Charles Proxy.
- Compare the address with your own. It must be different.
- Check the country in two lookup tools and compare it with the country you ordered.
- Repeat the request once. The address should stay the same, because each proxy keeps its address for the rental period.
Fixing common Charles Proxy proxy problems
These are the problems we see most often, with the fix that usually works.
- 407 Proxy Authentication Required. The username or password is wrong, or the tool did not send them. Copy both from the dashboard again, from the same proxy as the host and port.
- Connection timed out. The host or port is wrong, or a firewall blocks the port. Try curl first to separate a tool problem from a network problem.
- The exit country is not the one you expected. Look the address up in two lookup tools, because databases do not always agree, and check that you used the proxy from the order for that country.
- TLS or certificate errors on HTTPS pages. Use an HTTP proxy URL (http://...) for the proxy itself, even when the website is HTTPS. The proxy opens a tunnel and does not inspect the traffic.
- Pages load slowly. Lower your concurrency, reuse connections and try a proxy in a country closer to the target.
- The site blocks you. Slow down, send realistic headers, and consider an ISP proxy if the site is strict about datacenter ranges.
- Your balance ran out. Check the dashboard. Orders are paid from your balance, and an expired rental stops working.
Good habits when you use Charles Proxy with a proxy
A proxy only changes the address your traffic comes from. These habits make the difference between a setup that lasts and one that does not.
- Only test or inspect systems and traffic that you own or are authorised to test.
- Run one request first and confirm the exit address before a full test.
- Keep credentials out of shared project files and exported workspaces.
- Use a low request rate while you confirm the setup works.
- Log the response status of each request. A 407 means authentication failed.
Charles can decrypt HTTPS traffic. Use it only on devices and apps you own.
Using proxies responsibly in any country
A proxy is a networking tool and it is lawful in most places, but what you do with it still has to be lawful and fair. Follow the laws that apply to you and to the place you send traffic to, read the terms of the sites you visit, honour robots rules and rate limits, and never use an address to access accounts or data that are not yours. DataImpulse cannot give legal advice, and our acceptable use policy applies to every order.
In practice that means reading public pages, checking your own sites and ads, and testing your own products. If a task would be unwelcome to the site owner when done by hand, it is unwelcome when done through a proxy too.
Frequently asked questions
Does Charles Proxy work with DataImpulse proxies?
Yes. DataImpulse proxies are standard HTTP proxies with username and password authentication, and Charles Proxy supports that kind of proxy. Use the setup above and verify the address with an IP lookup.
What proxy settings do I enter in Charles Proxy?
Enter the host, the port, the username and the password of your proxy from the DataImpulse dashboard. Use HTTP as the proxy type.
Why does Charles Proxy show a 407 error?
A 407 means the proxy did not accept the credentials. Copy the username and password again, check for extra spaces, and make sure they belong to the same proxy as the host and port. Also check that the rental period has not ended.
Can I choose the country in Charles Proxy?
You choose it when you order. Every proxy in the order is registered in that country, so use the proxy for the country you need and check it with an IP lookup.
How do I keep the same IP in Charles Proxy?
Keep using the same proxy. Each proxy keeps its address for the whole rental period. For a different address, use another proxy from your order.
Is it safe to put my proxy password in Charles Proxy?
It is as safe as any other password in that tool. Do not share exported settings or projects that contain it, do not commit it to a repository and tell support right away if it leaks.
Ready to try it?
Create an account, add funds from US$1 and pick your country and proxy type.